Colvic Majestic 48 Part Project
£5k price drop 2 weeks only
- Boat REF# · 207673
- LOA · 14.48m
- Year ·
- Construction · GRP
- Underwater profile · Fin
- Berths · 6
- Engine · 1 x Diesel 127hp, Yanmar 4LE-HTE ()
- Lying · Plymouth
This boat is off the market but here are some boats that are still For Sale
Extra Details
| Designer | Bill Dixon |
|---|---|
| Builder | Colvic Craft (Hull) |
| Lying | Plymouth |
| Water capacity | 316.0 ltr (69.5 G) Total - 2 Tanks |
| Holding tank capacity | 174.0 ltr (38.3 G) Total - 2 Tanks |
Mechanical
| Engine | 1 x Diesel 127hp |
|---|---|
| Engine make and model | Yanmar 4LE-HTE () |
| Engine Hours | Not Recorded |
| Engine Cooled | Indirect |
| Steering | Wheel |
| Drive | Shaft |
| Prop(s) | 3 bladed Gori folding prop |
| Fuel consumption (approx) | Not Recorded |
| Generator output | 5KVA |
Engine hours = 0
Dimensions
| LOA | 14.48m |
|---|---|
| LWL | 11.81m |
| Beam | 4.47m |
| Draft Min | 1.61m |
| Displacement | 12,700kg (28,003.5lbs) |
| Headroom | 1.95m |
| Storage | Dry storage |
Sails
3 x sails need to be purchased
Rig: -
Furlex 400S mounted on stainless steel bow roller with integral height adjuster
Inner forestay mounted on stainless steel tie rod
Two 45mm diameter tie rods with bottle screws (for continuous rigging)
Selden cast alloy deck plate
Seedless adjustable mast heel plate
Sail Control:- Full details of sail control (Lewmar tracks, Spinlock clutches etc.) available on request.
Electrical Systems
24 volt battery,
Construction
| Construction | GRP |
|---|---|
| Underwater profile | Fin |
| Finish | Gelcoat finish |
55 litre twin coil calorifier
Hot water 8 litre accumulator tank
Grey Water Tank with twin access hatches
Black Holding Tank
Accommodation
| Total # of berths | 6 |
|---|---|
| No. of double berths | 2 |
| No. of single berths | 2 |
| Cabin(s) | 3 |
| Handbasin | 2 |
| Shower | 2 |
| Heads | 2 heads (Vac flush) |
Sink, fridge, freezer & cabin heating all need connecting.
Cooker needs to be purchased, any fuel type could be used at this point.
Wabesco Air-Top 5000 diesel water heater with thermostat to be mounted in side locker.
Sealand Vacuflush toilet in aft heads.
Vacuflush 5000 series fine china toilet in forward heads.
Accommodation
| Sink | |
|---|---|
| Refrigerator | |
| Freezer | |
| Cabin heating | |
| Pressurised water system | |
| Hot water system | |
| Non-Smokers |
Sink, fridge, freezer & cabin heating all need connecting.
Cooker needs to be purchased, any fuel type could be used at this point.
Wabesco Air-Top 5000 diesel water heater with thermostat to be mounted in side locker.
Sealand Vacuflush toilet in aft heads.
Vacuflush 5000 series fine china toilet in forward heads.
Deck Gear
| Swim Platform |
|---|
Electric Lewmar V4 windlass
1 anchors
(Delta)
8 x BS4 heavy duty boat stands with adjustable base
Lowerable swim / bathing platform
Nav Equipment
| Compass | |
|---|---|
| VHF DSC radio | |
| GPS |
Navigation instruments need to be purchased.
Simrad RS8400 DSC radio with DSC module, external speaker & 2 handsets
Intercom amplifier with siren & fog auto outputs
Raymarine E85001 interface box
Furuno GPS receiver
2 x Sony waterproof speakers mounted in cockpit
Safety Equipment
| Liferaft | |
|---|---|
| Horn |
5 bilge pumps (3 manual / 2 Electric)
Whale bilge pumps
Broker's Comments
Quality craftsmanship, fittings and equipment have been used on this solidly built 48ft Colvic Craft hull to create a beautiful 3/4 finished blue water yacht.
With a dream of creating this powerful and capable ocean going vessel to sail the world with his family, the owner hasn't spared any expense to get her well on the way to becoming exactly that.
Although ill health has forced him to retire from this project, he would dearly like someone to take over the helm to complete the task and sail away into their dream. Hence the very reasonable price.
It has been estimated that a further £50k would be needed to finish her as a cutter rigged yacht. The main items still required include keel, selden mast / boom, inner forestay furlex, remaining standing rigging / running rigging, 3 sails, cooker, navigation instruments, seating, bed foam & soft furnishings.
She comes with a large quantity of teak, teak faced marine plywood and teak mouldings, a set of paper construction plans and a detailed itinerary of parts, fixtures & fittings is available upon request.
14th Jan 2016 - the price of this vessel has been reduced from £58,500 to £53,500 for 2 weeks only. After this time, the boat will be moved to a new location for work to commence.
These boat details are subject to contract.
Note: Offers on the asking price may be considered.